background image

1

GB

Multi-Channel Indoor & Outdoor

Thermometer with Cable Free

™ 

Sensor  &

Radio Controlled

™ 

Clock

MODEL: RMR166

USER'S MANUAL

INTRODUCTION

Thank you for purchasing the RMR-166 Multi-Channel Indoor-
Outdoor Thermometer with 433MHz Cable Free

 temperature

sensor and 

Radio Controlled

 calendar clock.

This basic package consists of the main temperature and calendar
clock unit and a wireless remote temperature sensor, model THN-
138. The main unit can support up to three Cable Free

™ 

remote

sensors.  Additional remote sensors are available.

The main unit has a large easy-read LCD screen that displays the
indoor temperature, clock with calendar and temperature data
transmitted by the remote sensor to the main unit.  In addition,  the
RMR-166 will store in memory the maximum and minimum
indoor temperatures and temperatures transmitted from the remote
sensor.

The RMR-166 clock is a 

radio-controlled clock

. The clock

automatically synchronizes current time and date with radio signals
received from the US Atomic Clock, one of the world’s most
accurate timepieces.  To learn more about the US Atomic Clock
visit the  US Department of Commerce's National Institute of Stan-
dards and Technology website at www.nist.gov.  Other features
include three-language display choice, four-step crescendo daily
alarm and easy-change display modes.

MAIN FEATURES

AL

C

F

-D

M

Q

K

O

L

R

N

P

E

C

A

H

D

B

G

I

CHANNEL

M

D

AM

C

P M

E

ZONE

ON/OFF

Model No. RMR166

RMR166

Remote Thermometer

Tested To Comply
 With FCC Standards

FOR HOME OR OFFICE USE

J

F

CHANNEL

SET   /   MODE

MEMORY

DAILY

E X A C T S E T     R A D I O     C O N T R O L L E D

C A B L E     F R E E

Summary of Contents for RMR166














Reviews: