`
Wiring to Orcomm ORC-HAGW (V1)
The below can be followed when installing with orcomm Smart Home Gateway.
The ORC-HAGW must be set to monitoring Water Leak
Stand by voltage will vary depending on set up
–
refer to ORC-HAGW manual.
When an Analogue Input is pulled down more than 1V DC the alarm will trigger.
Testing the sensor
When testing the sensor
–
short the 2 blades on the water leak sensor together with a metal wire. The
monitoring device will then detect the connection and trigger as per designed application.
More information Links
ORC-LEAK-WD-WH
https://www.orcomm.co.uk/product/orc-leak-wd-wh/
Smart Home
https://www.orcomm.co.uk/product-category/products/home-control/
