8
System Setup
In System Setting menu, you can do the following settings:
Device No
You can install 99 outdoor panels in one building. If you want to install more than one outdoor
panel in one building, you need to set your outdoor panel into two type: main & sub outdoor panel.
Press
“
✓
”
key to enter the following setting screen:
Input digits between 1 to 99 to set the outdoor panel as main or sub. When you input digit “1”, the
outdoor panel is set to be the main outdoor station; when you input digit between 2 to 99, the
outdoor panel is set to be the sub outdoor panel. After setting the main & sub outdoor panel, the
indoor monitor can switch to monitor the main & sub outdoor panel.
Address No
Press
“
✓
”
key to enter the following setting screen:
When the device is used as outdoor panel, input (3 digits) building No. + (2 digits) unit No., then
press
“
✓”
key to confirm, it will show you “Success” on the display; when the device is used as wall
station, the item will be invalid.
