15
VOIP:
Click “VOIP” icon on the interface to enter into the following interface:
Input the relevant information if you have a SIP server or network/system engineer.
Proxy
: Enter the IP address of the SIP register server.
Realm
: Enter the Realm name or IP address. If unknown use same as proxy server.
Outbound
: If an outbound SIP server is being used enter the address hear.
STUN IP
: STUN server Address.
STUN Port
: STUN server port number.
User
: SIP Username given by proxy server.
Password
: SIP account password given by proxy server.
Bitrate
: Select bitrate for bandwidth control (Recommend to leave as default)
Host2ID
: Enabled use a combination of building, unit, flat and device number to make up SIP
user part in SIP From message.
Disabled uses the User as the SIP user part in the SIP from address when setting up
call. (Recommended Setting)
