Users manual
PICO 50+
9
7
MOUNTING AND SET-UP
7.1
Installation of the control panel with LCD display
1.
Prerpare wall openning, lay required wires and
cables to the installation place of the control panel
and install the mounting box for wall flush mounting.
The mounting box is included in the delivery set
2.
Unfasten gently the latches on the lower part of
the control panel using a screwdriver and disconnect
the front part from the back side. Do not disconnect
the connectors on the circuit board in the casing.
Attention!
The appliance should not be installed in a space where
curtains and the like objects obstate air flow!
Do not use a damaged control panel!
Do not install the control panel on an unequal surface!
Do not use excessive forces when screwing, don't damage the device!
Read the users manual before installing the unit
