Quick manual
TOUCH display
30
5.6
I WANT TO ADJUST THE PARALLEL CORRECTION AND THE SLOPE OF THE HEATING CURVE
For
ADJUSTING THE PARALLEL CORRECTION AND THE SLOPE OF THE HEATING CURVE,
2 different methods are available:
5.6.1
Method 1
1.
On the main screen, touch the icon with the information about
HEATING CIRCLE 1, HEATING CIRCLE 2 or HEATING
CIRCLE 3.
2.
Press the icon
once
, to reach the
PARALLEL AND SLOPE CURVE CORRECTION
setting menu.
3.
Pressing the icon
the
parallel correction and slope correction of the heating curve
is defined
4.
Every change of the setting is stored and confirmed with pressing the icon.
5.
Exiting the menu is done by pressing the icon
.
6.
For remaining heating circles, please repeat the steps 1 to 5.
