Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 38 / 204

ENGLISH

MOBILE WELDER OC PLUS

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

7.11

Activation

NOTICE

For operation of the power supply, see the chapter

Under the menu item "Activation" in the main menu, optionally purchased software upgrades can

be unlocked via an activation key in the power supply software

Procedure:

► From the main menu of the power supply, navigate to "System Settings" > "Activation”.

1. Enter the activation key (2) in the text input field (3).

2. Confirm the entry by pressing the "Activation" button (4).

Successful activation is indicated by a plus sign and a teardrop icon (5) in the menu header.

See the chapter

Main menu [

}

64]

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands