Orbitalum MOBILE WELDER OC PLUS Operating Instructions Manual Download

Page: 19 / 204

MOBILE WELDER OC PLUS

ENGLISH

ORBITALUM TOOLS GmbH

, D-78224 Singen www.orbitalum.com

►

Extra caution is required with chrome, nickel and manganese.

►

Do not use electrodes containing thorium.

2.7.11

Danger of system tipping over

WARNING!

Various injuries and damage to property from tipping over of the system through
the application of force from the outside.

►

Set up the machine so that it stands securely against external influences.

►

Keep moving masses at least 2 meter away from the machine.

2.7.12

Danger of explosion and fire

DANGER!

Danger of explosion and fire through flammable materials near the welding zone
or solvent in the room air.

►

Do not weld near solvents (for example where degreasing, painting is being carried out) or ex-
plosive substances.

►

Do not use flammable substances as a base in the welding area.

►

Ensure that no flammable materials or soiling is located near the machine.

2.7.13

General injuries through tools

CAUTION!

Injuries can occur during dismantling for the proper disposal of the orbital weld-
ing power supply through uncertainties in handling tools.

►

In case of uncertainties send the orbital welding power supply to Orbitalum Tools – proper dis-
posal is carried out here.

Summary of Contents for MOBILE WELDER OC PLUS













































































































































































































Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands

Orbitalum MOBILE WELDER OC PLUS, Operating Instructions Manual

Search results

Summary of Contents for MOBILE WELDER OC PLUS

Reviews:

Related manuals for MOBILE WELDER OC PLUS

Brands by name

Popular brands