ENGLISH
MOBILE WELDER OC PLUS
114
ORBITALUM TOOLS GmbH
, D-78224 Singen www.orbitalum.com
8.1.5.2
Adjust Program - Manual_Welding_Mode
Welding parameters can be displayed and adjusted via the "Adjust Program" menu item in the manual
welding mode.
You can select between the welding modes "pulsed welding" and "constant welding".
NOTICE
The welding parameter currently marked with the cursor is addi-
tionally highlighted in the "Welding ramp process graphic" by a
yellow font color.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Default values of welding parameters
NO.
PARAMETER
PROCESS DETAIL/ITEM
1
Current Profile
Drop-down list for selecting the desired current profile.
Adjusts the behavior of the welding arc.
Pulsed
• Pulsed welding current between the welding current
values "HP Current" and "LP current" within the time
intervals of "HP time" and "LP time".
Constant
• Constant welding current in amps.
2
"Gas Quantity"
Process gas quantity with which the manual welding torch is
pressurized during the welding process and the gas pre-
purge time and post-purge time.
Summary of Contents for MOBILE WELDER OC PLUS
