PREPARE OS HEAD SHOWER
1
1.
2125 mm
Measure and mark placement of Wall box
UNI Push.
2.
x4
Pan Head Stainless Steel Screw
Follow instructions provided in installa-
tion box for the Wall box UNI Push.
Should be performed according to local
regulations by a licensed professional.
PREPARE 3RD PARTY HEAD SHOW-
ER
At this stage, consider the necessary prepa-
rations for installing the third party shower
head, according to local regulations.
Requirements for installing third-party divert-
ers, head & hand showers (Applies to instal-
lation with Orbital Shower)
• When using a third-party diverter, head
shower or hand shower, it is recommended
to choose products with low counter pres-
sure in order to optimise the Orbital Show-
er performance. Should the combined
counter pressure from the diverter and
head/hand shower exceed 1 bar at 10 L/
min, it will affect the lifespan of the filter
capsule negatively. A combined counter
pressure exceeding 1,5 bar at 10 L/min is
not recommended.
• Any installed head/hand showers should
allow for a water flow of min. 9 L/min.
• It is recommended to install diverters de-
signed for wall-integration.
Pre-installation
17
