Monitoring and Analysis Tools
Graphics Data Logger
OceanTRx
TM
4-500 Installation and Operations Manual
9-11
3. Set the desired sampling time and sampling points.
NOTE:
When logging data at 1 sample per tick, it is recommended to set the number of points to
30,720, corresponding to 60 seconds of logging time per tick. Consequently, each additional minute
represents a single tick.
4. Click
OK (Enter)
. The
Logger Configuration
dialog box closes.
9.2.3
Logging Data with the Graphic Data Logger
To log data:
1
. Open the
Configuration & View
menu and select
Add Parameter
(or press the
<A>
key). The
Add Parameter
dialog box appears.
Figure
9-12: Add Parameter Dialog Box
2. Select a
Group/Subgroup
in the left-hand pane (for example, Antenna/Step Track),
then select the
Parameter
you wish to log in the right-hand pane (for example,
Azimuth Deviation).
3. Click
OK (Enter)
. The parameter appears in the
Logger
control table.
4. To log additional parameters simultaneously, reopen the
Add Parameter
window
(press the
<A>
key) and repeat steps 2 and 3 for each parameter. The selected
parameters appear in the control table highlighted in a different color.
NOTE:
To delete a parameter from the
Logger
control table, open the
Configuration & View
menu
and select
Delete
(or press the
<D>
key).
