Orban Optimod-PC 1101, Operating Manual

Page: 95 / 258

OPTIMOD-PC INSTALLATION
2-39
To do this, check (by clicking) the
B
ACKUP
I
NPUT
F
OR
D
IGITAL
1
box on either (or
both) of the
A
NALOG
L/R
and
D
IGITAL
2
inputs. If both are checked, then a failure
of the
D
IGITAL
1 I
NPUT
will automatically unmute only the
D
IGITAL
2 I
NPUT
. If the
D
IGITAL
2 I
NPUT
then fails, the A
NALOG
L/R I
NPUT
will automatically unmute.
You can set these functions separately on the Processor mixer and the Di-
rect Mixers. The three mixers will behave independently according to
their individually set programming.
If both “backup for digital 1” and “mute” are selected, the backup func-
tion will override the mute function.
Output and Routing Switcher Setup
The output routing switcher, found in the O
UTPUT
L
EVELS
page of the I/O Mixer, sets
the feed to:
•
The OPTIMOD-PC card’s stereo analog output
•
The OPTIMOD-PC card’s two AES3 digital outputs
•
The two WAVE inputs to the computer.
Each output is independently routed and can receive any of the following sources:
•
The direct WAVE 1 and 2 outputs from the computer
•
The output of Direct Mixer 1 or Direct Mixer 2
•
The Processor Mixer AGC output taken before the equalizers (i.e. the equali-
zation sections whose controls are available in the
EQ tab of the Control
Application)