Orban Optimod-PC 1101, Operating Manual

Page: 65 / 258

OPTIMOD-PC INSTALLATION
2-9
C) Set the “Application Control Setup” port through which the OPTIMOD-PC
Control Application running on networked computers can access the
OPTIMOD-PC Service running on your local computer.
The OPTIMOD-PC Service allows you to access
all cards on a given computer through the
same port.
The default port is 11100. If a given computer
also has OPTIMOD-PC 1100 cards installed,
you must assign the 1101 and 1100 cards
different port numbers to prevent conflicts.
D) Set the “Terminal Control Setup” port through
which the OPTIMOD-PC Control Application
running on networked computers can access
the OPTIMOD-PC TCP/IP terminal server to
allow external control of the OPTIMOD-PC
cards from either a Telnet/SSH client or a
custom third party application. See
OPTIMOD-
PC System/Mixer Control API on page 6-1.
The default port is 11101. If a given computer
also has OPTIMOD-PC 1100 cards installed,
you must assign the 1101 and 1100 cards
different port numbers to prevent conflicts.
E) Set
A
LLOW
N
ETWORK TO
A
CCESS
L
OCAL
C
ARDS
as
appropriate.
By default, this box is not checked. When it is not checked, no card in
your computer can be accessed through the OPTIMOD-PC Control Appli-
cation running on the network.
Before you check this box, be sure that you have assigned a password to
each OPTIMOD-PC card in your computer (step 7 on page 2-7).
F) If you wish to allow only specified computers to access local cards via the
OPTIMOD-PC Control Application, check the Application Control Setup
U
SE
N
ETWORK
A
CCEPT
L
IST
.
The Network Accept List adds another layer of security beyond password
security. It is not strictly necessary to use this feature if you have assigned
passwords to all cards in your computer.
a) Click the N
ETWORK
A
CCEPT
L
IST
button.
b) Click the
A
DD
button.
c) Enter host name, domain name, IP address, or subnet address in CIDR
format.
Examples:
host.domain.com Single Computer
domain.com Entire Domain
123.45.67.8 Single Computer