Orban OPTIMOD-FM 8600S, Operating Manual

Page: 109 / 354

OPTIMOD-FM DIGITAL INSTALLATION
2-53
Administrative Operations Available via Serial Port / Ethernet
In the following tables of commands and responses:

Text that the user enters appears in
MONOSPACED BOLD
.

Responses that the 8600 transmits appear in
monospaced normal
.

The symbol “

” means CR (for received commands) and CR+LF (for transmitted
responses from 8600).
1. To recall a preset:
Command Response
RP XXXXXXX[PASSCODE]

(valid passcode and preset name)
ON AIR: XXXXXXX
(invalid passcode)
[no error message is issued]
In the above table:
XXXXXXX
= the preset name;
PASSCODE
= any valid passcode.

If a non-existent control value and/or an invalid passcode is entered, the 8600
will ignore the command. If a non-existent preset name is entered, your Optimod
will return an error message to indicate that the preset you entered does not ex-
ist.

You can apply this command anytime after the 8600 boots up. The 30-minute
timeout does not apply.

This command is useful in interfacing automation systems to the 8600.
2. To turn the analog diversity delay on or off for a given output:
Command Response
DE XXX[PASSCODE]
(valid passcode and argument)
DIVERSITY DELAY: [ON,OFF] (for each
output)
(invalid passcode)
[no error message is issued]
In the above table:
XXX = ANALOG_ON, ANALOG_OFF, DIGITAL1_ON,
DIGITAL1_OFF, DIGITAL2_ON, DIGITAL2_OFF,
COMPOSITE_ON, COMPOSITE_OFF,
or
?
?
returns the current on/off status for each output that is
configured to emit the analog FM processed audio
PASSCODE = ANY VALID PASSCODE
.