Orban OPTIMOD-FM 8600, Operating Manual

Page: 62 / 397

2-2
INSTALLATION ORBAN MODEL 8600
without our having to request a copy of your bill of sale or other proof of
purchase. Please fill in the Registration Card and send it to us today. (The
Registration Card is located after the cover page).
Customer names and information are confidential and are not sold to
anyone.
2. Check the line voltage, fuse and power cord.
We strongly recommend powering your Optimod from an Uninterruptable Pow-
er Supply (UPS). This will protect your Optimod from damage caused by line
surges and will prevent audio interruptions caused by brownout-induced re-
boots.
A) DO NOT connect power to the unit yet!
B) Check the
V
OLTAGE
S
ELECT
switch. This is on the rear panel.
The 8600 is shipped from the factory with the
V
OLTAGE
S
ELECT
switch set
to the 230V position. Check and set the
V
OLTAGE
S
ELECT
switch to your
local voltage requirements. To change the operating voltage, set the
V
OLTAGE
S
ELECT
to 115V (for 90-130V) or 230V (for 200-250V) as appro-
priate.
C) Install the proper fuse and fuse holder, per your country’s standards.
The 8600 is shipped from the factory with the fuse and fuse holder re-
moved. Select the appropriate fuse holder and fuse from the supplied
parts in the accessory kit. Use the gray fuse holder for domestic / 115V
operation, or the black fuse holder for European / 230V operation. For
safety, use ½ A-250 V Slow-Blow for 115V and 250mA-250V for 230V for
230V.
Figure 2-1: AC Line Cord Wire Standard)