Orban OPTIMOD-FM 8600, Operating Manual

Page: 121 / 397

OPTIMOD-FM DIGITAL INSTALLATION
2-61
1. Navigate to the System Setup > Network Remote screen.
2. Program one or more remote control interfaces.
To program a given remote input, use
L
OCATE
to highlight the input. As you turn
the control knob, the functions listed below will appear in the highlighted field.
A momentary pulse of voltage will switch most functions, except as noted.
• Preset Name
: switches that preset on the air. Any factory or user preset may
be recalled via the control interface.
•
Input : Analog: selects the analog inputs.
•
Input: Digital : selects the digital input. No J.17 de-emphasis is applied to the
digital input.
•
Input : J.17: selects the digital input and applies J.17 de-emphasis to
the digital input.
• Bypass
: switches the Bypass Test Mode on the air.
• Tone
: switches a Tone Test on the air.
•
Exit Test : If a test mode (Tone or Bypass) is switched on the air,
EXIT TEST
re-
verts to the normal operating mode using the previous processing preset.
•
Stereo : switches the 8600’s stereo encoder on using normal double sideband
modulation of the stereo subchannel.
•
SSB: . switches the 8600’s stereo encoder on using compatible single side-
band/vestigial sideband modulation of the stereo subchannel. See SSB Stereo
Encoder Operation on page 3-11.
•
Mono From Left, Mono From Right, or Mono From Sum : switches the
8600’s stereo encoder off, using the Left, Right, or Sum (L+R) respectively, as
the program source.
•
MOD Reduction 1, or MOD Reduction 2 : reduces the program modulation
by the percentage programmed in the Input/output screen. When voltage is
removed, these functions are deactivated.
•
Reset Clock To Hour
•
Reset to Midnight
•
Monitor Mute
is a non-latching function that mutes the analog output if it
has been programmed to emit the monitor signal (in the
I
NPUT
/O
UTPUT
:
O
UTPUT
1
screen).
• Analog Out Delay In
: Activates the diversity delay for the analog output if it
is configured to emit the output of the analog FM processing chain (see page
3-74).