Orban OPTIMOD-FM 8600, Operating Manual

Page: 116 / 397

2-56
INSTALLATION ORBAN MODEL 8600
•
If a non-existent control value and/or an invalid passcode is entered, the 5500
will ignore the command.
•
You can apply this command anytime after the 5500 boots up. The 30-minute
timeout does not apply.
15. To fetch real-time operational status information from the Optimod:
This provides a real-time status report including the following information:
Command Response
RT [PASSCODE]

5500 Status:
digital input 1 lock [active][inactive]
digital input 2 lock [active][inactive]
remote contact closure 1 [active][inactive]
remote contact closure 2 [active][inactive]
remote contact closure 3 [active][inactive]
remote contact closure 4 [active][inactive]
remote contact closure 5 [active][inactive]
remote contact closure 6 [active][inactive]
remote contact closure 7 [active][inactive]
remote contact closure 8 [active][inactive]
tally out 1 [active][inactive]
tally out 2 [active][inactive]
16. To fetch information about the active processing preset:
Command Response
AP [PASSCODE]?

Returns active processing preset name
AP [PASSCODE]??

Returns active processing preset control
settings
LP [PASSCODE]

Returns a list of all available processing
presets
17. To fetch diagnostic information from the 8600:
This provides a status report indicating technical parameters:
Command Response
ST [PASSCODE]

8600 Status:
Ver. 1.0.x.x Bootrom: 4
mmm. dd, yyyy HH:MM:SS
On Air: LOUD-HOT+BASS
User Presets: 0
Memory Total: 16318464
Init Available: 13606912
Mem Available: 10022480
Mem Contiguous: 9420800