Orban OPTIMOD-FM 5700i, Operating Manual

Page: 106 / 335

2-50
INSTALLATION ORBAN MODEL
RP GREGG OPEN [PASSWORD]
disconnect
Automated Control Using Netcat
Only one utility is required to use this method: netcat.exe. This is available as a free
download. Google “netcat.”
This method is scripted with a .cmd file and calls a .txt file.
•
The .cmd file calls netcat.exe to make the network connection between the com-
puter executing netcat.exe and 5700i, and specifies the .txt file to use.
•
The .txt file contains the 5700i commands.
The following two examples recall the presets GREGG and GREGG OPEN respec-
tively.
The file “5700i_P1_Gregg.cmd” contains:
nc.exe -v -n -w 1 123.45.67.89 23 < 5700i_P1_Gregg.txt
The file “5700i_P1_Gregg.txt” contains:
RP GREGG [PASSWORD]
disconnect
The file “5700i_P2_GreggOpen.cmd” contains:
nc.exe -v -n -w 1 123.45.67.89 23 < 5700i_P2_GreggOpen.txt
The file “5700i_P2_GreggOpen.txt” contains:
RP GREGG OPEN [PASSWORD]
disconnect
Administrative Operations Available via Serial Port / Ethernet
In the following tables of commands and responses:
•
Text that the user enters appears in
MONOSPACED BOLD
.
•
Responses that the 5700i transmits appear in
monospaced normal
.
•
The symbol “
«
” means CR (for received commands) and CR+LF (for transmitted
responses from 5700i).
1. To recall a preset:
Command Response
RP XXXXXXX[PASSCODE]
«
(valid passcode and preset name)
ON AIR: XXXXXXX