9
TERROR BASS 500 COMBO
ENGLISH
USING YOUR AMPLIFIER
SPEAKON CABLE
Be sure to connect the amplifier’s speaker output to the combo’s internal speakers (rear Speakon
jack) using the supplied Speakon cable.
IMPEDANCE SELECTOR SWITCH (REAR)
Make sure the impedance selector is
switched to 8 Ohms when connected to the combo’s internal
speakers
. Another 8 Ohm cabinet can be connected using the second Speakon socket on the rear of
the combo cabinet. The impedance selector must be switched to 4 Ohms when doing this. Never
mismatch impedances.
IMPORTANT!
For countries or regions with a mains voltage of 115v or 120v, please switch the small, red
mains selector to 115v or 120v and replace the fuse in the black pull out fuse tray, below the
mains inlet, with the 120v version supplied.
For countries or regions with a mains voltage of 230v, please switch the small, red mains
selector to 230v and replace the fuse in the black pull out fuse tray, below the mains inlet,
with the 230v version supplied.
TB500
230V = T6.3A
115/120V = T8A
