Refer to the Service Manual for instructions on installing PCIe cards. After the card
is replaced, refer to the Deployment and User's Guide for instructions on cabling
and software configuration.
Safety Precautions When Rackmounting
Learn about safety precautions during rack installation for Oracle Database Appliance.
This section describes safety precautions you must follow when installing the server
into a rack.
Caution:
Personal injury or equipment damage. Prevent the rack from tipping over.
1) Deploy the anti-tilt bar or legs on the equipment rack before beginning an
installation. 2) Always load equipment into a rack from the bottom up so that
the rack will not become top-heavy and tip over. 3) Mount equipment in the
rack such that it does not create uneven or dangerous mechanical loading.
4) Do not use slide-rail mounted equipment as a shelf or workspace.
Caution:
Equipment damage caused by elevated temperature. 1) If you install the
equipment in a closed or multi-unit rack assembly, ensure that the operating
ambient temperature inside the rack does not exceed the maximum ambient
temperature specified for the server. For server environmental requirements,
see
. 2) Install the equipment in the rack such
that airflow is not restricted or impeded.
Caution:
Supply circuit damage and data loss. The AC circuits used to supply
power to the system must be rated for the maximum amount of power that
the system requires. See
for input power
requirements.
Caution:
Equipment damage. Maintain reliable earthing. Pay particular attention to
supply connections other than direct connections to the branch circuit (for
example, use of power strips).
Chapter 4
Safety Precautions When Rackmounting
4-4
