manualshive.com logo in svg

Oracle X7 series, Administration Manual

Share
Download
Oracle X7 series Administration Manual Download Page 25

Launch and Log In to Oracle ILOM Through a Remote Ethernet Connection

Ensure that the web browser is supported by Oracle ILOM. For more information, refer to

the 

Oracle ILOM User's Guide for System Monitoring and Diagnostics, Firmware Release

4.0.x

 at 

http://www.oracle.com/goto/x86admindiag/docs

.

b.   

Type the IP address or host name of the server in the browser address bar,

for example 192.0.2.213.

The Oracle ILOM Login dialog box appears.

c.   

Type your user name and password, and then click Log In.

If this is the first time you are accessing Oracle ILOM, use 

root

 for the user name and

changeme

 for the password.

The Oracle ILOM Summary Information page appears.

3.

To launch and log in to Oracle ILOM from the command-line interface, perform

the following steps:

a.   

Open a terminal window.

b.   

Type your Oracle ILOM user name and the IP address or host name of the

server SP using the following syntax:

Accessing and Using System Administration Tools

25

Summary of Contents for X7 series























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands