Oracle X7-2L, Service Manual

Page: 54 / 308

Power Down the Server Gracefully Using the Oracle ILOM CLI
Power Down the Server Gracefully Using the Oracle ILOM CLI
Performing a graceful shutdown ensures that all of your data is saved and the system is ready
for restart.
1.
Log in to the server as superuser or equivalent.
Depending on the nature of the problem, you might want to view the system status or the log
files or run diagnostics before you shut down the system. For log file information, refer to the
Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Collection at
http://www.
oracle.com/goto/ilom/docs
.
2. Notify affected users that the server will be powered down.
3. Save any open files, and quit all running applications.
Refer to your application documentation for specific information about these processes.
4.
Log in to the Oracle ILOM command-line interface (CLI) using an Administrator
account.
Refer to “Accessing Oracle ILOM” in Oracle Servers X7-2 and X7-2L Installation Guide .
5. At the Oracle ILOM prompt, shut down the operating system:
-> stop /System
Note -
The
stop / System
command does not guarantee a system shutdown. This command
is only a request to the host operating system (OS) to perform a system shutdown. To ensure
a system shutdown, see “Power Down the Server for Immediate Shutdown Using the Oracle
ILOM CLI” on page 57 .
If the system is running the Oracle Solaris OS, refer to the Oracle Solaris system administration
documentation for additional information.
6. Disconnect the power and cables from the server.
See “Disconnect Cables From the Server” on page 59 .
Caution -
When you power down the server using Oracle ILOM, the server enters Standby
power mode. Power is still directed to the service processor remote management subsystem and
power supply fans. To completely power off the server, you must disconnect the power cords
from the power supplies.
54 Oracle Server X7-2L Service Manual • October 2017