Oracle X7-2, Service Manual, Page: 113 / 312

Remove a PCIe Riser From PCIe Slot 1 or 2
Callout Description
Note - This riser is different
from the risers in slots 1 and
2.
Related Information
■
“PCIe Slot Characteristics” on page 122
Remove a PCIe Riser From PCIe Slot 1 or 2
Note -
PCIe slot 1 is nonfunctional in single-processor systems.
1. Prepare the server for service.
a. Power off the server and disconnect the power cords from the power
supplies.
See “Powering Down the Server” on page 53 .
b. Extend the server to the maintenance position.
See “Extend the Server to the Maintenance Position” on page 59 .
c. Attach an antistatic wrist strap to your wrist and then to a metal area on the
chassis.
See “Take Antistatic Measures” on page 61 .
d. Remove the server top cover.
See “Remove the Server Top Cover” on page 62 .
2. Select the PCIe riser that you want to remove.
See “PCIe Slot Characteristics” on page 122 .
3. If a PCIe card is installed in the riser, disconnect any external cables from the
card.
Servicing PCIe Risers (CRU) 113