Oracle X7-2 Installation Manual Download Page 128

Page: 128 / 148

Getting Software From Software Delivery Cloud

In the Release field, select a software release from the drop-down list.

Click Search to view a list of the patches for the software release. See

“Software

Releases” on page 126

for a description of the available software releases.

To select a patch for a software release, click the patch number next to the

software release version.

Use the Shift key to select more than one patch.
A pop-up action panel appears. The panel contains several action options, including the

ReadMe, Download, and Add to Plan options. For information about the Add to Plan option, on

the Add to Plan button, click the down arrow and select Why use a plan?.

To review the ReadMe file for this patch, click ReadMe.

10.

To download the patch for the software release, click Download, and in the File

Download dialog box, click the patch zip file name.

The patch for the software release downloads.

Getting Software From Software Delivery Cloud

You can obtain operating system and application software from the Oracle Software Delivery.

For information, see

https://edelivery.oracle.com/osdc/faces/Home.jspx

Download Software Using Oracle Software

Delivery Cloud

Oracle Software Delivery Cloud allows you to download Oracle software, including operating

systems and application software for your Oracle server.

You must have a valid user account.

Navigate to the Oracle Software Delivery Cloud home page:

https://edelivery.

oracle.com/osdc/faces/Home.jspx

At the Sign In screen, sign in.

Fill out the search information.

128

Oracle Servers X7-2 and X7-2L Installation Guide • October 2017

Summary of Contents for X7-2





















































































































































Search results

Summary of Contents for X7-2

Reviews:

Related manuals for X7-2

Brands by name

Popular brands

Oracle X7-2, Installation Manual

Search results

Summary of Contents for X7-2

Reviews:

Related manuals for X7-2

Brands by name

Popular brands