manualshive.com logo in svg

Oracle X6 series, Administration Manual, Page: 68 / 126

Share
Download
Oracle X6 series Administration Manual Download Page 68

Modify Service Processor Network Settings (BIOS)

68

Oracle X6 Series Servers Administration Guide • April 2016

Related Information

■

Configuring Oracle ILOM (

ilomconfig

), 

Oracle Server CLI Tools User's Guide

 at 

http://

www.oracle.com/goto/ohmp/docs

Modify Service Processor Network Settings (BIOS)

Use this optional procedure to modify the default Oracle ILOM network settings.

■

For IPv4 network environments, the IP Discovery Mode property is set to DHCP by default.

■

For IPv6 network environments, the Autoconfig property is set to Stateless by default.

1.

Access the BIOS Setup Utility.

For instructions, see 

“Accessing the BIOS Setup Utility” on page 33

.

2.

Navigate to the Advanced menu.

3.

Select BMC Network Configuration.

The BMC Network Configuration screen appears.

4.

To configure an IPv4 environment, perform the following steps in the IPv4

portion of the screen:

Summary of Contents for X6 series































































































































Reviews:

No comments