Oracle X6 series Page 50 Administration Manual Download

Page: 50 / 126

Set Temporary Next Boot Device (Oracle ILOM)

Oracle X6 Series Servers Administration Guide • April 2016

The Boot Option dialog box appears.

In the Boot Option dialog box, select the device that you want to move into the

selected slot.

The device you selected is moved into the indicated slot, and BIOS reorders the remaining

devices to accommodate the change.

Press the F10 function key to save your changes and exit the BIOS Setup Utility.

The utility prompts you to save your changes or discard your changes.

Set Temporary Next Boot Device (Oracle ILOM)

You can use Oracle ILOM to set the next boot device on your server. Setting the next boot

device in Oracle ILOM causes your server to boot from the selected device on the next power

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands