manualshive.com logo in svg

Oracle X6 series, Administration Manual, Page: 15 / 126

Share
Download
Oracle X6 series Administration Manual Download Page 15

Multiple-System Management Tools

Overview of System Administration Tools

15

Related Information

■

“Accessing and Using System Administration Tools” on page 21

Multiple-System Management Tools

To perform system management functions across 

multiple

 systems simultaneously, consider

using Oracle Enterprise Manager Ops Center. Oracle Enterprise Manager Ops Center might

be included with your server as part of a server support contract. You can also order Oracle

Enterprise Manager Ops Center software from Oracle.

Oracle Enterprise Manager Ops Center is a highly scalable, unified management platform for

physical and virtual environments. Use Oracle Enterprise Manager Ops Center to manage

multiplatform x86 and SPARC systems that are distributed throughout a global data center

and to integrate Oracle systems with existing tool sets. Oracle Enterprise Manager Ops Center

facilitates many aspects of compliance reporting (ITIL) and data center automation, enabling

you to manage thousands of systems simultaneously.

Refer to the Oracle Enterprise Manager Ops Center product information at: 

http://www.

oracle.com/technetwork/oem/ops-center/index.html

Related Information

■

“Single-System Management Tools” on page 13

Oracle Integrated Lights Out Manager (ILOM)

Oracle Integrated Lights Out Manager (ILOM) is system management firmware that is

embedded on the server service processor (SP). Using Oracle ILOM, you can monitor the server

health and performance and configure server settings independently of the operating system.

Oracle ILOM provides local or remote access through a serial management port and a network

management port. By default, these ports offer a dedicated connection to Oracle ILOM. Any

time power is applied to the server, you can log in to Oracle ILOM from a local terminal device

or from a web browser or secure shell (SSH) session on a remote system. To access Oracle

ILOM, see 

“Accessing Oracle ILOM” on page 21

.

Oracle ILOM provides a web interface and a command-line interface (CLI).

Summary of Contents for X6 series































































































































Reviews:

No comments