Oracle X6 series Page 115 Administration Manual Download

Page: 115 / 126

Downloading and Updating System Firmware and Software

115

Downloading and Updating System Firmware

and Software

Firmware and software for the server are updated periodically. The updates are made available

as a software release. You can obtain the latest software release from My Oracle Support.

This section describes the components of software releases and provides instructions for

downloading and installing them.

Task

Link

Review the components of a software release and the

tools that can be used to install them.

“Software Release Overview” on page 115

Obtain updates from My Oracle Support.

“Obtaining Software and Firmware

Updates” on page 116

Install updates using Oracle ILOM, or Oracle Hardware

Management Pack.

“Install Software and Firmware Updates” on page 118

Software Release Overview

A software release is a server-specific set of downloadable files (patches) containing the

available firmware, software, hardware drivers, tools, and utilities for the server. All of these

files have been tested together and verified to work with your server.

You should update your server firmware and software as soon as possible after a new software

release becomes available. Software releases often include bug fixes, and updating your server

ensures that it has the latest firmware and software.

The ReadMe document that is included with each patch in a software release contains

information about the patch, such as what has changed or not changed from the prior software

release, as well as bugs that are fixed with the current release.

The server product notes identify the software releases supported on your server.

Summary of Contents for X6 series































































































































Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands

Oracle X6 series, Administration Manual

Search results

Summary of Contents for X6 series

Reviews:

Related manuals for X6 series

Brands by name

Popular brands