manualshive.com logo in svg

Oracle X6 series, Administration Manual, Page: 101 / 126

Share
Download
Oracle X6 series Administration Manual Download Page 101

Backing Up and Restoring Hardware and Firmware Configurations

101

Backing Up and Restoring Hardware and

Firmware Configurations

This section provides procedures for backing up, restoring, and replicating system firmware

configurations.

Task

Link

Back up the current BIOS, Oracle ILOM, or RAID

configuration.

“Backing Up Current Firmware and Hardware

Configurations” on page 101

Restore a saved BIOS, Oracle ILOM, or RAID

configuration.

“Restoring Saved Firmware

Configurations” on page 105

Reset the BIOS firmware to factory defaults.

“Resetting the Firmware to Default

Settings” on page 110

Backing Up Current Firmware and Hardware Configurations

To prevent the loss of functioning firmware settings, back up the current BIOS, Oracle ILOM,

or RAID configurations. Backed up configurations can be restored on the server or on another

server in your data center. The following procedures describe how to back up firmware

configurations to an XML file using the system administration tools:

■

“Back Up the Current BIOS Firmware Configuration (Oracle ILOM)” on page 102

■

“Back Up the Current Oracle ILOM Firmware Configuration (Oracle

ILOM)” on page 103

■

“Back Up the Current BIOS Firmware Configuration (Oracle Hardware Management

Pack)” on page 104

■

“Back Up the Current Oracle ILOM Firmware Configuration (Oracle Hardware

Management Pack)” on page 105

Summary of Contents for X6 series































































































































Reviews:

No comments