Oracle X4 series Administration Manual Download Page 60

Page: 60 / 240

Configure Hardware for RAID (Oracle System Assistant)

Description

Links

Use to create and manage RAID volumes on your server after the operating

system is installed, as long as they are not boot drives.

Configure RAID using BIOS.

“Configure RAID (BIOS)” on page 64

Use the BIOS Setup Utility to create and manage RAID volumes.

Other RAID Options

There are many variations of RAID and the tools used to configure it. This section provides a

limited set of instructions. Other methods include:

■

LSI SAS2 2008 RAID Management Utility

: Use the

sas2icru

commands for some

HBAs, including the SGX-SAS6-REM-Z.
You can download this tool from:

http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-rem-z.aspx

■

LSI MegaCLI or MegaRAID Storage Manager

: Use either of these utilities to create and

manage RAID volumes for HBAs, including the SGX-SAS6-R-REM-Z (note the "R" in the

name to distinguish it from the above HBA).
You can download these tools from:

http://www.lsi.com/sep/Pages/oracle/sg_x_sas6-r-rem-z.aspx

See Also:

See your HBA and hardware documentation for more information about RAID.

Configure Hardware for RAID (Oracle System

Assistant)

The Oracle System Assistant RAID Configuration screen allows you to configure RAID 0,

RAID 1, RAID 5, or RAID 10 for the server storage drives.

Note -

Perform this task before installing an operating system.

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands