Oracle X4 series Administration Manual Download Page 158

Page: 158 / 240

Access Flash Drive Files from an Operating System

Access Flash Drive Files from an Operating

System

You can access the flash drive files from the operating system using a command line or a file

browser.

Use a command line or file browser to navigate to the flash drive.

The label for the drive is:

■

Oracle Solaris and Linux: ORACLE_SSM

■

Oracle VM: ORACLE SSM

■

Windows: ORACLE_SSM

If you cannot access the flash drive:

■

If you cannot see the flash drive, Oracle System Assistant is probably disabled. See

“Enable

or Disable Oracle System Assistant (BIOS)” on page 171

■

If you can see the flash drive but cannot not access it, you must mount it. This might be

necessary with Oracle Solaris 10 and Oracle VM operating systems, but is normally not

necessary on Windows, Linux operating systems, or the Solaris 11 operating system.

■

Oracle Solaris:

“Mount Oracle System Assistant Flash Drive on Solaris 10

Host” on page 161

■

Oracle VM:

“Mount Oracle System Assistant Flash Drive on Oracle VM

Host” on page 162

■

Linux:

“Mount Oracle System Assistant Flash Drive on a Linux Host” on page 163

■

Windows: Mounting is not necessary

To see the system documentation, navigate to the

/documentation

directory.

158

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands