Oracle X4 series Administration Manual Download Page 152

Page: 152 / 240

Using the Oracle System Assistant User Interface

Select whether you want to reboot or power off the system.

Oracle System Assistant exits. The system reboots or powers off if you selected one of those

options.

Using the Oracle System Assistant User Interface

The Oracle System Assistant user interface (UI) is divided into three sections, the left side Task

pane, the center Main pane, and the Platform Documentation, Help, and Exit pane, which is

located at the bottom of the UI.

Task and Main Pane

Oracle System Assistant is organized by tasks. The eight task buttons are located on the left side

of the interface in the Task pane.

152

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands