Oracle X4 series Administration Manual Download Page 148

Page: 148 / 240

Launch Oracle System Assistant at Startup

Oracle System Assistant is enabled by default but can be disabled. For details, see

“Enable or

Disable Oracle System Assistant (BIOS)” on page 171

Launch Oracle System Assistant at Startup

Use the following procedure to launch Oracle System Assistant while booting the system.

Before You Begin

■

“Enable or Disable Oracle System Assistant (BIOS)” on page 171

Verify that the server is in standby mode or Full power mode.

Verify that a monitor, keyboard, and mouse are attached to the server, either

locally or through a remote KVM session.

For details, see

“Launch a Remote System Console Redirection Session” on page 43

Boot the server.

Boot messages appear on the monitor.

When prompted, press the F9 function key.

You can also press CTRL-O on a serial keyboard.

Tip -

If you are connected to the server using the Oracle ILOM Remote Console, press F9

several times; otherwise, the server might miss the signal due to delays.

148

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands