manualshive.com logo in svg

Oracle X4 series, Administration Manual

The Oracle X4 series features cutting-edge technology and exceptional performance. Offering a comprehensive and detailed Administration Manual, users can easily download the manual for free from our website. Explore the full potential of the Oracle X4 series and enhance your understanding of its features and functionalities.

Share
Download
background image

Set Power Supply Fan Speed Policies on CMM

■

From the Web interface:

a.   

Click System Management > Policy.

b.   

In the Chassis Monitoring Module Policies table, select the appropriate

power supply policy (for example, Load Efficiency or Monitor Power

Supply Side), and then in the Actions list box click either Enable or

Disable.

■

From the CLI, type:

set /CMM/policy LIGHT_LOAD_EFFICIENCY_MODE=[

 enabled|disabled

 ] MONITOR_PS

 n

_SIDE

 n

 =[ 

enabled|disabled

 ]

Where 

n

 represents the power supply slot location (0 or 1) and side (0 or 1).

See Also

System Management Power Supply Policies Configurable from CMM, 

 Oracle ILOM

Configuration and Maintenance Guide

 for firmware version 3.1 or 3.2.

Set Power Supply Fan Speed Policies on CMM

When necessary, you can force the speed of the blade chassis power supply fans to high or low.

Before You Begin

■

Log in to Oracle Integrated Lights Out Manager (ILOM). For instructions on how to log in

to Oracle ILOM, see 

“Launch and Log In to Oracle ILOM” on page 39

.

■

Ensure that you have Admin (a) role privileges in Oracle ILOM.

Note - 

The power supply fan speed policies in Oracle ILOM are disabled by default.

This procedure provides both web and command-line interface (CLI) instructions for the chassis

monitoring module (CMM).

To modify the power supply fan speed:

110

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Reviews:

No comments

Related manuals for X4 series

Zonet ZUH2000 - User Manual preview
ZUH2000 -
Brand: Zonet Pages: 33
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Brand: IBM Pages: 70
SEH SEH InterCon PS54a-G Hardware Installation Manual preview
SEH InterCon PS54a-G
Brand: SEH Pages: 24
Sun Microsystems Netra ft 1800 Installation Manual preview
Netra ft 1800
Brand: Sun Microsystems Pages: 90
PRIMERGY BX600 S2 Hardware Manual preview
BX600 S2
Brand: PRIMERGY Pages: 87
Vidyo VidyoGateway Administrator'S Manual preview
VidyoGateway
Brand: Vidyo Pages: 186
Supermicro SuperServer 1029U-T Series Quick Reference Manual preview
SuperServer 1029U-T Series
Brand: Supermicro Pages: 1
MSI E7210 Master-FARM User Manual preview
E7210 Master-FARM
Brand: MSI Pages: 34
IBM 419452u - Servers System X3250 M2 Xeon... Installation Manual preview
419452u - Servers System X3250 M2 Xeon...
Brand: IBM Pages: 84
Axis NPS 550 User Manual preview
NPS 550
Brand: Axis Pages: 85
Artesyn Embedded Technology ATCA-9405 Quick Start Manual preview
ATCA-9405
Brand: Artesyn Embedded Technology Pages: 2
Polycom RSS 2000 V1.0 Getting Started Manual preview
RSS 2000 V1.0
Brand: Polycom Pages: 11
XtendLan TC Administrator'S Manual preview
TC
Brand: XtendLan Pages: 54
Silicon Graphics International SGI UV 30 User Manual preview
SGI UV 30
Brand: Silicon Graphics International Pages: 68
Silicon Graphics UV 2000 System User'S Manual preview
UV 2000
Brand: Silicon Graphics Pages: 116
Intel TIGPT1U - Carrier Grade Server Specification preview
TIGPT1U - Carrier Grade Server
Brand: Intel Pages: 89
Planet NAS-7101 User Manual preview
NAS-7101
Brand: Planet Pages: 49
Lantronix MSS100 Quick Start Manual preview
MSS100
Brand: Lantronix Pages: 8

Brands by name

Popular brands

Load more brands