manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 62

Understanding the Software Configurations

■

“Understanding Medium Domains (Half Rack)” on page 65

■

“Understanding Small Domains (Half Rack)” on page 67

Logical Domain Configurations and PCIe Slot Mapping (Half

Rack)

The following figure provides information on the available configurations for the Half Rack.

It also provides information on the PCIe slots and the InfiniBand (IB) HCAs or 10-GbE NICs

installed in each PCIe slot, and which logical domain those cards would be mapped to, for the

Half Rack.

FIGURE   16

Logical Domain Configurations and PCIe Slot Mapping (Half Rack)

Related Information

■

“Understanding Large Domains (Half Rack)” on page 63

■

“Understanding Medium Domains (Half Rack)” on page 65

62

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands