manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 146

SuperCluster Tools

2.

Type.

# 

svcprop -p configuration/build svc:/system/oes/id:default

3.

Determine the version of software based on the output.

■

ssc-1

.

x.x

■

ssc-2

.x.x

 (or later)

SuperCluster Tools

Use one of these tables according to the version of SuperCluster software. Use the tables to see

what tools are available.

To identify your version, see 

“Identify the Version of SuperCluster Software” on page 145

.

Note - 

The tables do not provide a complete list of tools for SuperCluster. Instead, the tables

list the tools are covered in subsequent sections and provides information on what is available

based on specific version of SuperCluster software.

TABLE 20

SuperCluster v1.x Tools

Tool

Description

Links

ssctuner

A set of scripts and configuration files that run

on SuperCluster Oracle Solaris 10 and Oracle

Solaris 11 global zones to monitor and tune various

parameters.

“Tuning the System (

ssctuner

)” on page 158

osc-setcoremem

Enables you to change how CPU and memory

resources are allocated across domains.

“Configuring CPU and Memory Resources (

osc-

setcoremem

)” on page 170

TABLE 21

SuperCluster v2.x Tools

Tool

Description

Links

Oracle I/O Domain Creation

tool

Enables you to create I/O domains on demand,

assigning CPU, memory and I/O resources of your

choice.

Refer to the 

Oracle I/O Domain Administration

Guide

.

osc-setcoremem

Enables you to change how CPU and memory

resources are allocated across domains. The tool

automatically assigns the appropriate amount

of memory to each domain based on how you

allocated CPU resources, ensuring optimal

performance by minimizing NUMA effects.

“Configuring CPU and Memory Resources (

osc-

setcoremem

)” on page 170

146

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands