Oracle Sun Server X4-4 Service Manual Download

Page: 31 / 292

Server Subsystems Overview

Sun Server X4-4 Overview

used for system booting. Your system might be equipped with a preinstalled Oracle System

Assistant USB device. Do not use the Oracle System Assistant USB drive for booting an OS

or as server storage. If installed in your server, the Oracle System Assistant USB drive must be

installed in the internal port labeled "OSA USB" and it must contain only the Oracle System

Assistant file system.

Note -

Port P0 is reserved for the Oracle System Assistant USB device.

For port designations, see

“DVD, Storage Drive, and USB Designations” on page 73

Additionally, the server has four external USB ports, two on the front panel and two on the back

panel. See

“External Components and Features” on page 19

System Management Subsystem

The server has two embedded system management tools: Oracle ILOM and Oracle System

Assistant.

Service Processor (SP) Oracle ILOM

The server comes with a removable service processor (SP) daughter card that is mounted on

the server motherboard. The SP supports the industry-standard IPMI feature set and includes

Oracle Integrated Lights Out Manager (ILOM) 3.2.2 and remote redirection of keyboard, video,

mouse, and storage (KVMS).

The SP runs Oracle ILOM, a single-server management tool that allows you to monitor

and maintain your server by providing real-time status and detailed information about the

subsystems and components in your server. Oracle ILOM runs independently of the server

OS and is accessible in both full power and standby power modes. The SP Oracle ILOM is

accessible through the SP GigabitEthernet NET MGT port located on the server back panel or

through one of the host 10 GbE ports (using sideband management).

Oracle System Assistant

Your server might also come equipped with Oracle System Assistant. Oracle System Assistant

is a server provisioning and update tool that assists in initial server set up and OS installation

and allows you to easily manage server updates. As an option, Oracle System Assistant is

delivered on a USB flash drive that is factory-installed in the internal USB slot labeled "OSA

USB." The drive is configured with a server-specific version of Oracle System Assistant. You

can start Oracle System Assistant from the server boot screen or from Oracle ILOM.

Summary of Contents for Sun Server X4-4





































































































































































































































































































Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands

Oracle Sun Server X4-4, Service Manual

Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands