Oracle Sun Server X4-4 Installation Manual Download

Page: 126 / 148

Firmware and Software Access Options

Firmware and Software Access Options

Use one of the following options to obtain the latest set of firmware and software for your

server:

■

Oracle System Assistant

– Oracle System Assistant is a new factory-installed option for

Oracle servers that allows you to easily download and install server firmware and software.
For more information about using Oracle System Assistant, refer to

Oracle X4 Series

Servers Administration Guide (

http://www.oracle.com/goto/x86AdminDiag/docs

)

■

My Oracle Support

– All system firmware and software are available from the My Oracle

Support web site.
For more information about what is available on the My Oracle Support web site, refer to

https://support.oracle.com

For instructions on how to download software releases from My Oracle Support, see

“Download Firmware and Software Using My Oracle Support” on page 127

Available Software Release Packages

Downloads on My Oracle Support are grouped by product family, then product, then version.

The version contains one or more downloads (patches).

For servers and blades, the pattern is similar. The product is the server. Each server contains

a set of releases. These releases are not true software product releases, but rather are releases

of updates for the server. These updates are called software releases and comprise several

downloads, all tested together. Each download contains firmware, drivers, or utilities.

My Oracle Support has the same set of download types for this server family as shown in the

following table. The same firmware and software can also be downloaded using Oracle System

Assistant.

Package Name

Description

When to Download This Package

Sun Server X4-4 SW

version

–

Firmware Pack

All the system firmware, including

Oracle ILOM, BIOS, and option card

firmware.

You need the latest firmware.

Sun Server X4-4 SW

version

– OS

Pack

An OS Pack is available for each

supported operating system version.

Each OS Pack includes a package of

all tools, drivers, and utilities for that

version of the OS.

You need to update OS-specific

drivers, tools, or utilities.

126

Sun Server X4-4 Installation Guide • October 2015

Summary of Contents for Sun Server X4-4





















































































































































Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands

Oracle Sun Server X4-4, Installation Manual

Search results

Summary of Contents for Sun Server X4-4

Reviews:

Related manuals for Sun Server X4-4

Brands by name

Popular brands