manualshive.com logo in svg

Oracle Sun Netra T5440, Service Manual, Page: 54 / 162

Share
Download
Oracle Sun Netra T5440 Service Manual Download Page 54

1.10  Obtaining the Chassis Serial Number

54

Sun Netra T5440 Server • September 2015

■

VTS Kernel Error – Error messages pertaining to SunVTS software itself.

Look here if SunVTS software appears to be acting strangely, especially

when it starts up.

■

Solaris OS Message

s

 (

/var/adm/messages

) – A file containing messages

generated by the operating system and various applications.

■

Log Files (

/var/opt/SUNWvts/logs

) – A directory containing the log files.

Example   1-15

Alternate Command for Starting SunVTS Software

# 

/opt/SUNWvts/bin/sunvts -display 

display-system

:0

1.10 Obtaining the Chassis Serial Number

To obtain support for your system, you need your chassis serial number. The chassis serial

number is located on a sticker that is on the front of the server and another sticker on the side
of the server. You can also run the ALOM CMT CLI 

showplatform

 command to obtain the

chassis serial number.

For example:

EXAMPLE   1-16

Obtaining the Chassis Serial Number With the 

showplatform

 Command

sc> 

showplatform

SUNW,Sun-Netra-T5440
Chassis Serial Number: 0529AP000882
Domain Status
------ ------
S0 OS Standby
sc>

1.11 Additional Service Related Information

In addition to this service manual, the following resources are available to help you keep your

server running optimally:

■

Server Product Notes

 – Contain late-breaking information about the system including

required software patches, updated hardware and compatibility information, and solutions to
know issues. The product notes are available online at: 

http://docs.sun.com

Summary of Contents for Sun Netra T5440



































































































































































Reviews:

No comments