c. Unmount the CD/DVD drive.
# u
mount /dev/cdrom /mnt/cdrom
d. Remove the CD or DVD from the CD/DVD drive.
Edit and save the
/etc/xinetd.d/tftp
file.
Make the following changes:
■
Change the
-s /tftpboot
entry to
-v -s /home/pxeboot
.
■
Change the disable attribute to
no
.
Restart the inetd server.
#
service xinetd restart
“How to Install and Configure the neopxe Boot Server Daemon” on page 46
▼
How to Install and Configure the neopxe Boot Server
Daemon
Complete the following steps on your DHCP server. The neopxe server is designed for use with
a DHCP server that is running on the same system.
Note –
Throughout this procedure, replace
name
with the corresponding version of Linux. For
example, Red Hat Enterprise Linux 4 uses
rhel4-pxefiles
.
Install the neopxe boot server daemon onto the system that is your DHCP server.
#
cd /tmp/
name
-pxefiles/neopxe-0.2.0
#
./configure
#
make
#
make install
where
name
is the file name corresponding to your version of Linux. For example,
rhel4-pxefiles
.
Append the path
/usr/local/sbin/neopxe
to the
rc.local
file by typing the following
command, making sure to use two greater-than signs.
#
echo "/usr/local/sbin/neopxe" >> /etc/rc.d/rc.local
Copy the PXE Linux image from the
/tmp/
directory.
#
mkdir /home/pxeboot
#
cp /tmp/
name
-pxefiles/pxelinux.0 /home/pxeboot
3
4
Next Steps
1
2
3
Overview of PXE Servers
Sun Fire X2270 M2 Server Installation Guide for Linux Operating Systems • September 2011, -12
46