Oracle Sun Fire V125, Service Manual, Page: 29 / 44

Chapter 1 Parts Removal and Installation 1-17
FIGURE 1-10
Installing Memory
Note – Note that the second DIMM pair shown in the preceding figure is optional.
The standard configuration includes only the DIMM pair that is closest to the CPU.
1.10.3 Removing Memory
1. Power down the server and disconnect the power cable.
See Section 1.2, “Controlling Server Power” on page 1-2 .
2. Open the back cover.
See Section 1.4.3, “Opening the Back Section of the Cover Assembly” on page 1-7 .
3. Locate the correct DIMM socket.
4. Open the latches at the sides of the socket.
5. Remove the module from the DIMM socket.
6. Close the rear cover.