manualshive.com logo in svg

Oracle StorageTek T10000D, Manual, Page: 43 / 51

Share
Download
Oracle StorageTek T10000D Manual Download Page 43

 

 

  

Page 43 of 51 

 

              

© Copyright 2017 Oracle Corporation 

 

                              This document may be freely reproduced and distributed whole and intact including this Copyright notice.  

 

being  loaded  onto  the  module.    This  test  is  applied  to  all  loaded  firmware 
including  the  FPGA  firmware  components.  If  the  test  passes,  the  module  will 
store the new firmware image in EEPROM.  A reboot of the module is required to 
switch  to  the  new  firmware.    If  the  test  fails,  the  new  firmware  image  will  be 
discarded and the module will resume normal operation.   

2.9.4  Critical Functions Tests 

When operating in the Permanent Encryption and Encryption Enabled Approved 
Modes, critical function self-tests are required by the module when operating the 
SP 800-90A CTR  DRBG.   Critical functions  tests  are crucial for the proper  and 
secure  operation  of  the  DRBG.    These  tests  will  ensure  the  DRBG  always 
produces random information.   
 
The  StorageTek  T10000D  Tape  Drive  performs  the  following  critical  function 
self-tests: 
 

 

SP 800-90A DRBG Instantiate Test 

 

SP 800-90A DRBG Generate Test 

 

SP 800-90A DRBG Reseed Test

 

 

SP 800-90A DRBG Uninstantiate

 

2.10  Mitigation of Other Attacks 

This section is not applicable.  The module does not claim to mitigate any attacks 
beyond the FIPS 140-2 Level 1 requirements for this validation. 

Summary of Contents for StorageTek T10000D




















































Reviews:

No comments