Remove a PCIe Card Carrier
■
If you are removing a PCIe card carrier from a powered-down server, go to
4.
Take one of these actions to bring the PCIe card offline.
■
Press the ATTN button to take the card offline. The Power OK LED should go
off, indicating that the card is ready to be removed. Go to
.
■
Use the
hotplug
command to bring the card offline:
a.
List all devices in the device tree, including PCIe cards:
#
hotplug list -cv
This command lists dynamically reconfigurable hardware resources and shows
their operational status. In this case, look for the status of the PCIe card you plan to
remove. This information is listed in the
State
column.
For example:
#
hotplug list -cv
Connection State Description
______________________________________________________________________________
PCIE1 EMPTY PCIe-Native
...
PCIE7 ENABLED PCIe-Native
Device Usage
___________________________________________________________________________
SUNW,qlc@0 -
fp -
disk -
fp@0,0 -
SUNW,qlc@0,1 -
fp -
disk -
fp@0,0 -
PCIE13 EMPTY PCIe-Native
PCIE15 EMPTY PCIe-Native
b.
Bring the PCIe card offline.
For example:
#
hotplug disable PCIE7
c.
Verify that the PCIe card status is
PRESENT
.
162
SPARC T8-4 Server Service Manual • January 2022
Summary of Contents for SPARC T8-4
