Oracle SPARC T8-4, Installation Manual

Page: 55 / 92

Identifying Ports
Pin Signal Description Pin Signal Description
1 Request to Send 5 Ground
2 Data Terminal Ready 6 Receive Data
3 Transmit Data 7 Data Set Ready
4 Ground 8 Clear to Send
Related Information
■
“Server Overview” on page 12
■
“Front Panel Components” on page 14
■
“Rear Panel Components” on page 15
■
“Cabling Requirements” on page 51
■
“Connect the SER MGT Cable” on page 59
■
“Connect a Terminal or Emulator to the SER MGT Port” on page 67
NET MGT Port
The NET MGT RJ-45 port, located on the rear panel, provides an optional Ethernet connection
to the SP. The NET MGT port is an optional connection to the Oracle ILOM SP. The SP NET
MGT port uses an RJ-45 cable for a 10GBASE-T connection. If your network does not use a
DHCP server, this port will not be available until you configure network settings through the
SER MGT port. See “Rear Panel Components” on page 15 .
Connecting Cables 55