Oracle SPARC T7-4, Service Manual

Page: 55 / 208

Servicing Processor Modules
This topic describes how to service processor modules, and how to upgrade the server from a
single processor module configuration to a dual processor module configuration.
Caution -
You must disconnect the power cords before servicing this component. See
“Disconnect Power Cords” on page 53 .
Description Links
Replace a processor module. ■ “Determine Which Processor Module Is
Faulty” on page 60
■ “Preparing for Service” on page 43
■ “Remove a Processor Module or Processor Filler
Module” on page 60
■ “Install a Processor Module or Processor Filler
Module” on page 64
■ “Verify a Processor Module” on page 67
Learn the process for upgrading the server from a single
processor module configuration to a two processor
module configuration.
“Server Upgrade Process” on page 56
Remove the processor module as part of another
component's service operation.
“Remove a Processor Module or Processor Filler
Module” on page 60
Install the processor module as part of another
component's service operation.
“Install a Processor Module or Processor Filler
Module” on page 64
Related Information
■
“Identifying Components” on page 13
■
“Processor Module Components” on page 19
■
“Detecting and Managing Faults” on page 25
■
“Preparing for Service” on page 43
■
“Component Service Categories” on page 46
■
“Servicing DIMMs” on page 69
Servicing Processor Modules 55