Oracle SPARC T5-4, Service Manual, Page: 32 / 204

Configuring POST
32 SPARC T5-4 Server Service Manual • July 2016
No. LED Icon or Label Description
■ Green – Power is applied to the server.
7 Locator LED and button
(white)
Turn on the Locator LED by pressing the Locator button, or see
“Locate the Server” on page 50 . When lit, the LED blinks rapidly.
8 Service Required LED
(amber)
The
fmadm faulty
command provides details about any faults that
cause this indicator to light. See “Check for Faults” on page 38 .
Under some fault conditions, individual component fault LEDs are lit
in addition to the Service Required LED.
9 Power OK LED(green) Indicates these conditions:
■ Off – Server is not running in its normal state. System power might
be off. The SP might be running.
■
Steady on
– Server is powered on and is running in its normal
operating state. No service actions are required.
■ Fast blink – Server is running in standby mode and can be quickly
returned to full function.
■ Slow blink – A normal but transitory activity is taking place. Slow
blinking might indicate that system diagnostics are running or that
the system is booting.
10 SP LED SP Indicates these conditions:
■ Off – AC power might have been connected to the power supplies.
■ Steady on, green – SP is running in its normal operating state. No
service actions are required.
■ Blink, green – SP is initializing the Oracle ILOM firmware.
■ Steady on, amber – An SP error has occurred and service is
required.
11 Overtemp LED(amber) Indicates these conditions:
■
Off
– Indicates a steady state, no service action is required.
■ Steady on – Indicates that a temperature failure event has been
acknowledged and a service action is required.
Related Information
■
“Front Panel Controls and LEDs” on page 29
■
“Understanding Diagnostics” on page 23
Configuring POST
These topics explain how to configure POST as a diagnostic tool.
■
“POST Overview” on page 33
■
“Oracle ILOM Properties That Affect POST Behavior” on page 33
■
“Configure POST” on page 35
■
“Run POST With Maximum Testing” on page 37