Configuring POST
Parameter
Values
Description
min
If
diag
mode
=
normal
, runs minimum set of tests.
/HOST/diag
trigger
none
Does not run POST on reset.
hw-change
(Default) Runs POST following a FRU replacement or an AC
power cycle.
hw_change_level
■
max
(default) – Runs the maximum set of tests.
■
min
– Runs the minimum set of tests.
hw_change_verbosity
■
min
(default) – Displays the minimum level of output.
■
max
– Displays information for each step.
■ normal – Displays a moderate amount of information,
including component names and test results.
■
debug
– Displays extensive debugging information.
■
none
– Disables the output.
power-on-reset
Runs POST on every power on.
power_on_level
■
max
(default) – Runs the maximum set of tests.
■
min
– Runs the minimum set of tests.
power_on_verbosity
■
min
(default) – Displays the minimum level of output.
■
max
– Displays information for each step.
■ normal – Displays a moderate amount of information,
including component names and test results.
■
debug
– Displays extensive debugging information.
■
none
– Disables the output.
error-reset
(Default) Runs POST if fatal errors are detected.
error_reset_level
■
max
(default) – Runs the maximum set of tests.
■
min
– Runs a minimum set of tests.
error_reset_verbosity
■
min
(default) – Displays the minimum level of output.
■
max
– Displays information for each step.
■
normal
– Displays a moderate amount of information,
including component names and test results.
■
debug
– Displays extensive debugging information.
■
none
– Disables the output.
all-resets
Runs POST after any reset.
/HOST/diag
verbosity
normal
Displays all test and informational messages in POST output.
min
Displays functional tests with a banner and pinwheel in POST
output.
max
Displays all test, informational, and some debugging
messages in POST output.
debug
Displays extensive debugging information.
none
Does not display POST output.
This flowchart illustrates the same set of Oracle ILOM
set
command variables.
42
SPARC T5-2 Server Service Manual • February 2017
Summary of Contents for SPARC T5-2
