Oracle SPARC M7, Service Manual, Page: 53 / 330

Configure POST
■
“Configure POST” on page 53
Configure POST
1. Log in to Oracle ILOM.
See “Log In to Oracle ILOM (Service)” on page 67 .
2. Set the virtual keyswitch to the value that corresponds to the POST
configuration you want to run.
This example is for the SPARC M7-8 and sets the virtual keyswitch to
normal
, which
configures POST to run according to other parameter values.
-> set /HOST keyswitch_state=normal
Set 'keyswitch_state' to 'Normal'
Note -
The value of
keyswitch_state
must be
normal
when individual POST parameters are
changed.
For possible values for the
keyswitch_state
parameter, see
Oracle ILOM Administrator's
Guide for Configuration and Maintenance at
http://www.oracle.com/goto/ilom/docs
.
3.
If the virtual keyswitch is set to
normal
, and you want to define
level
or
verbosity
,
set the respective parameters.
Syntax:
set /HOST/diag
property
=
value .
For example:
-> set /HOST/diag default_level=max
-> set /HOST/diag default_verbosity=max
4. View the current values for settings.
For example:
-> show /HOST/diag
/HOST0/diag
Targets:
Properties:
default_level = max
default_verbosity = max
Detecting and Managing Faults 53