Oracle SPARC Enterprise M4000, Installation And Service Manual, Page: 82 / 182

3-4 External I/O Expansion Unit for SPARC Enterprise M x 000 Servers Installation and Service Manual • April 2011
FIGURE 3-4
Screws for Card Locks
8. Turn the carrier over and remove the dummy card or PCI card.
9. For very small PCI cards (1.25 in./31 mm tall or 3.0 in./76 mm wide), it is
necessary to do one or both of the following:
■
Move the long card lock (type B lock) from the horizontal slider slot to the front
vertical slider slot, then slide it down to reach the top of the PCI card. See
■
Rotate the small card lock (type C lock) and slide it to the rear edge of the PCI
card.
See
FIGURE 1-19
and
FIGURE 1-20
for examples.
10. Place the PCI card on the carrier.
a. Place the front of the card inside the housing (
FIGURE 3-5
).
Figure Legend
1 Card lock screws
1