Sun StorEdge A3500 System FRUs
With the exception of one item, the following is a list of administrative tasks that require no
cluster-specific procedures. Shut down the cluster, and then see the
Sun StorEdge
A3500/A3500FC Controller Module Guide
, the
Sun StorEdge A1000 and D1000 Installation,
Operations, and Service Manual
, and the
Sun StorEdge Expansion Cabinet Installation and
Service Manual
for the following procedures. See the Oracle Solaris Cluster system
administration documentation for procedures about how to shut down a cluster. For a list of
Oracle Solaris Cluster documentation, see
“Related Documentation” on page 6
■
Replacing a power cord that connects to the cabinet power distribution unit (see the
Sun
StorEdge Expansion Cabinet Installation and Service Manual
).
■
Replacing a power cord to a storage array (see the
Sun StorEdge A1000 and D1000
Installation, Operations, and Service Manual
).
■
Replacing the power-supply housing.
■
Replacing the battery unit.
■
Replacing a DC-power or battery harness.
■
Replacing a controller module assembly.
■
Replacing a controller module power cord.
■
Replacing a controller module card cage.
The following is a list of administrative tasks that require no cluster-specific procedures. See the
Sun StorEdge A3500/A3500FC Controller Module Guide
, the
Sun StorEdge RAID Manager User’s
Guide
, the
Sun StorEdge RAID Manager Release Notes
, the
Sun StorEdge FC-100 Hub
Installation and Service Manual
, and the documentation that shipped with your FC hub or FC
switch for the following procedures.
■
Replacing a storage array-to-host SCSI cable.
■
Replacing a controller module fan canister.
■
Replacing the power supply fan canister.
■
Replacing a SCSI cable from the controller module to the storage array.
■
Replacing a storage array-to-host or storage array–to-hub fiber-optic cable.
■
Replacing an FC hub (see the
Sun StorEdge FC-100 Hub Installation and Service Manual
).
■
Replacing an FC hub gigabit interface converter (GB(C) or Small Form-Factor Pluggable
(SFP) that connects cables to the host or hub.
■
Replacing a GBIC or an SFP on a node.
■
Replacing an FC switch.
Maintaining Storage Arrays
Chapter 1 • Installing and Maintaining a SCSI RAID Storage Device
33
